Most fireplace TV stands don’t use a lot of electricity compared to big household appliances, but the exact cost depends on whether you run the heater or just the flame/LED effects. The “fireplace” portion is typically an electric insert, and the heater is what drives most of the power draw.
The heat setting uses the most electricity. Many electric fireplace inserts are around 1,400–1,500 watts on high heat (similar to a space heater). By contrast, flame/ember lighting and LED accent lights often use a small fraction of that, so you can enjoy the look without the higher energy use.
A simple way to estimate is: watts ÷ 1,000 = kWh used per hour. A 1,500-watt heater uses about 1.5 kWh per hour. Multiply that by your electric rate to estimate cost (for example, at $0.15/kWh, that’s about $0.23 per hour on high heat). If you only run the flame effect, the hourly cost is typically much lower.
Room size, insulation, thermostat setting, and how long the heater cycles on all matter. Many inserts don’t run at full power continuously; they cycle to maintain temperature. If you use the stand primarily for ambiance—flames on, heat off—electricity use stays modest.
Use the flame effect without heat when you don’t need extra warmth, set the thermostat a bit lower, and treat it as zone heat (warm the room you’re in instead of the whole home). For a deeper look at features, sizing, and what to expect from a popular style, see the main guide here: https://michellen.com/guide-70in-farmhouse-fireplace-tv-stand-42in-electric-insert-led-lights/.
Yes. Most models let you run the flame/ember effect and lights independently, so you get the ambiance without the higher electricity draw of the heater.
Leave a comment